Installation - Ecler DACORD Série DACORD T108 Notice D'utilisation

9. INSTALLATION

The best hanging method has been studied for each model of the DACORD series. Each
one is provided with the optimal installation system. But if these assembly options are not suitable for
your needs DACORD models also feature anchor nuts accepting M8 standard bolts. In addition all
the line incorporates a useful handle on the connexion plate in order to facilitate assembly:
DACORD T108
Provided with U-bracket for its vertical or horizontal installation, on wall or ceiling. For its
installation on ceiling the use of ECLER SRDA accessory is recommended as it facilitates
loudspeaker orientation in conjunction with U-bracket. ECLER SR10 mounting fixture can also be
used for wall mounting and allows the loudspeaker to be oriented in any direction.
DACORD T208
Provided with U-bracket for its installation on wall or ceiling. For its installation on ceiling
the use of ECLER SRDA accessory is recommended as it facilitates loudspeaker orientation.
It also features a 35mm standard pole mount receptacle to mount it on a standard 35mm
tripod (ECLER TRIP01) or mounting fixtures provided with a rod of this diameter (ECLER SR12).
DACORD H206
Provided with U-bracket for its installation on wall or ceiling. For its installation on ceiling
the use of ECLER SRDA accessory is recommended as it facilitates loudspeaker orientation in
conjunction with U-bracket. ECLER SR10 mounting fixture can also be used for wall mounting and
allows the loudspeaker to be oriented in any direction.
DACORD H208
Provided with U-bracket for its installation on wall or ceiling. For its installation on ceiling
the use of ECLER SRDA accessory is recommended as it facilitates loudspeaker orientation in
conjunction with U-bracket.
IMPORTANT NOTE
In no case should these equipments be suspended via their carrying handles; use the
accessories adapted to each application. Whenever loudspeakers are wall or ceiling mounted, a
redundant mounting system is obligatory as safety measure. Use a steel cable or chain of suitable
gauge to avoid the fall of the loudspeaker in case some element of the main suspension system
would break away from its fastening device.
www.audiovias.com
7