Handling Electrical Cables - Dometic TEC29EV Instructions De Montage

TEC29EV
CAUTION!
!
 Fire hazards
Do not install the generator in a box or room without any open-
ings, but in well-ventilated spaces instead.
 Only operate the generator if you are certain that the housing
and the cables are undamaged.
 Install the generator on a stable surface.
 Do not tilt the generator more than 20° from the vertical position.
NOTICE!
A
 Only use the device as intended.
 The generator is not suitable for use in water vessels.
 Do not make any alterations or conversions to the device.
 If a welding operation has be done on the vehicle disconnect all
generator cables, otherwise the electronics may be damaged.
2.2

Handling electrical cables

WARNING!
!
 The electrical power supply may only be connected by a quali-
fied electrician (e.g. according to VDE 0100, Part 721 in
Germany).
CAUTION!
!
 Attach and lay the cables so that they cannot be tripped over or
damaged.
NOTICE!
A
 Use cable ducts to lay cables through walls with sharp edges.
 Do not lay loose or bent cables next to electrically conductive
materials (metal).
 Do not pull on the cables.
EN
Safety and installation instructions
17