Checklist When Data Is Missing In The Display - ADE WS 1907 Mode D'emploi

If no sufficiently strong signal has been received,
the base station aborts the receiving process after a
few minutes and the radio-tower symbol goes out. The
receiving process is started again at a later point in time.
In this case, the time proceeds as usual (beginning with
the start time of "00:00").

Checklist when data is missing in the display

No data display from the time signal transmitter
1. Check whether the location of the base station is
suitable, see "Choosing a location".
2. Restart reception manually, see "Manually starting
signal reception".
3. Wait until the base station automatically switches
back to reception at a later time. The reception is
usually better at night.
4. Manually perform the settings if reception is not
possible at your location, see "Setting the time and
date manually".
No data display from the wireless rain gauge
1. Check whether you have inserted the batteries
correctly.
2. Check whether the location of the wireless rain
gauge is suitable; see "Choosing a location".
WS 1907 digital rain gauge with DCF radio clock
59