Rain Gauge; Fault/Remedy - ADE WS 1907 Mode D'emploi

Rain gauge

1. Remove the rain funnel as described in chapter
"Wireless rain gauge".
2. Carefully remove dirt, insects etc. from the rain gauge.
3. Clean the rain funnel and especially the funnel outlet.
4. Replace the rain funnel. The locking tabs must click into
place.
Never use oil to clean, preserve parts or make it
easier for them to pass through.

Fault/Remedy

Fault
The DCF77 signal for
the time cannot be
received.
The displayed
temperature values
appear too high.
Instead of showing
the measured values
for temperature or
humidity, the display
shows H.HH or LL.L.
WS 1907 digital rain gauge with DCF radio clock
Possible cause
‚ Check the chosen location.
‚ Start the signal reception
manually, if necessary.
‚ Adjust the time manually.
‚ Check if the base station or
radio gauge is exposed to
direct sunlight.
‚ The values lie above or
below the measurement
range.
77