Installation Instructions; Important Safety Instructions - Dyson airblade 1A Instructions D'installation

Installation instructions

CA
READ AND SAVE THESE
INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

BEFORE INSTALLING OR USING THIS APPLIANCE READ
ALL INSTRUCTIONS AND CAUTIONARY MARKINGS
IN THE INSTALLATION INSTRUCTIONS AND THE
MAINTENANCE MANUAL.
When using an electrical appliance, basic precautions should
always be followed, including the following:
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
1. This Dyson appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
2. Before servicing or cleaning the appliance, switch the power
off at the service panel. Ensure the switch is locked to prevent
the power from being switched on accidentally. If the means
of switching off the power cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
3. Do not use sealant when fixing the appliance to the wall.
4. Do not install directly above a heating appliance.
5. The maximum altitude of use is 2,300 metres.
6. The size of the lead wire used for the wiring connection
(including grounding lead) shall not be smaller than 18AWG.
DO NOT USE ANY JETWASH EQUIPMENT FOR CLEANING ON
OR NEAR THIS APPLIANCE.
WARNING
ALL ELECTRICAL INSTALLATION AND REPAIR WORK SHOULD BE
CARRIED OUT BY A QUALIFIED ELECTRICIAN IN ACCORDANCE
WITH CURRENT LOCAL CODES OR REGULATIONS.
CAUTION
Your hand dryer should be located indoors. Operating temperature
range 0°C (32°F) to 40°C (104°F). To reduce the risk of fire or
electric shock, do not expose the internal mechanisms/components
of this appliance to moisture.
27