Lupus Electronics LUPUSNIGHT LE-308 Manuel De L'utilisateur page 17

STEP 2: Attach the bracket to the wall (See Pic 3).
a) Find the bracket and 4 screws supplied in the sale package.
b) Fasten the bracket onto the wall with the 3 screws as shown in Pic 3.
STEP 3: Attach the camera to the bracket.
a) Use a screwdriver to loosen the joint lock (see Pic 4) from
the bottom.
b) Move up the platform of the joint lock for this position is
convenient for you to lock and secure the camera.
c) Find the two screw holes on the bottom of the camera, and
align the holes with the screw holes on the platform of the
joint lock.
d) Fasten the camera to the joint lock with screws.
STEP 4: Adjust the camera angle and secure the joint lock to fix.
a) Adjust the camera position to the proper angle.
b) Use the screwdriver to secure the joint lock, and fix the camera angle.
STEP 5: Arrange the camera cable (See Pic 5).
a) Pass the camera cable through the two holes on the bracket.
b) Pass the cable to the hole drilled for hiding it (if any).
STEP 6: Finish the installation (See Pic 6).