Technical Data; Accessories Provided; Wall Installation - Varma Tec TOP TOP15 Mode D'emploi

22.Should you accidently touch the surface of the bulb, clean it immediately with a soft cloth moistened with
alcohol.
23.In the event of malfunction and/or breakdown turn the appliance off and immediately contact the manufacturer
or an Authorized Technical Assistance Centre.
24.Original Star Progetti spare parts must be used in any repairs. In the event of damage to the lead or its plug
immediately replace it, this should be carried out at the premises of the manufacturer or an authorized Technical
Assistance Centre. Use a lead with T180 characteristics.
25.Switch the main plant supply off when:
a) there is a malfunction;
b) you decide to clean the outside;
c) you decide not to use the appliance for a long period of time.
26.Do not cover or obstruct the front grille when in use.
27.On installation provide a suitable size omnipolar circuit-breaker with 3mm or more distance between the
contacts.
28.Do not cover or obstruct the appliance whilst it is on.
29.Keep the front grille clean.
30.To prevent the risk of fire, do not install the appliance and its heating elements near to or directed towards
curtains, beds or other objects or easily inflammable materials; there must be an adequate minimum distance
ensured to avoid the risk of damage or fire.
31.Do not use the appliance in conjunction with programmers, timers or other tools capable of turning it on
automatically without a presence of an operator.
CAUTION: THIS SYMBOL INDICATES THAT CARE MUST BE TAKEN TO AVOID DAMAGING THE APPLIANCE
1.Connect Varma Top to a single-phase 220-240V supply (varies from country to country).
2.Varma Top must be earthed.
3.Check that the power supply is suitable for the load to be installed.
4.The appliance must always be installed in an upright position.
5.Only touch the end caps. Should you accidently touch the surface of the bulb, clean it immediately with a soft
cloth moistened with alcohol.
6.The bulb can be damaged by contact with bare hands
7.Do not cover or obstruct the appliance whilst it is on.
8.Replacement of the supply cable must only be carried out by the manufacturer or the help service or a specialised
technician.
9.Warning, if Varma Top is installed near curtains or parasols, make sure that it cannot inadvertently come into
contact with them.

1. TECHNICAL DATA

Code: V110/15
Power: 1500 Watts
IPX5 protection rating - Totally protected against rain and water sprays
220-240V 50/60Hz
Class I

2. ACCESSORIES PROVIDED

Varma Top is supplied with: 1.5 m electric cable, Protection grid in stainless steel, Bracket for wall installation and
under parasols.

3. WALL INSTALLATION

The appliance must not be placed immediately below a mains socket.
Install the heater on wall at a distance of (see drawing 3 page 22)
- 32 cm minimum from the ceiling
- 100 cm from the side walls
- The installation height ranges from to 190 cm to 220 cm.
The downward inclination of approx. 45° and the appliance perfectly horizontal position is ideal for obtaining the
best result.
8