What, If; Reversing The Doors - Beko TSE 1400 Notice D'utilisation

en

What, if....

1- The appliance will not work, even though
it is switched on.
• Check if the power cable is properly
connected!
• Check if the mains supply is in order, or if a
circuit breaker has been tripped!
• Check the temperature control for correct
setting!
2- The interior light does not work.
Check the power supply!
Check the installation of the light bulb! Unplug
the power cable before checking the light bulb.
(Also see the section "Replacing the interior
llight bulb")
3- Other possible malfunctions
Not every malfunction is a case for our
customer service. Very often, you can easily
resolve the problem without requesting service.
Before requesting service, please check if the
malfunction has been caused by an operating
error. If this is the case, and a service has
been requested, a service charge will be levied
even if the appliance is still under guarantee.
If the problem persists please contact your
dealer or customer service.
Please have the type and serial number of
your appliance ready when calling. The rating
label is located inside the appliance.

Reversing the doors

Proceed in numerical order (Fig. 6).
8
en