Download The Latest Firmware; Troubleshooting - Teac HA-P90SD Mode D'emploi

SETTINGS
PLAY Playback settings
AREA
REPEAT
RANDOM
EQ Equalizer settings
PRESETS
DISPLAY Display settings
BRIGHT
DIM TIME
DISP OFF
RESCAN SD card file scanning settings
AUTO
MANUAL
OTHERS Other settings
RESET
MAX VOL
PWR SAVE
DGTL IO
PWR MODE
USB CHRG
ABOUT
* The continuous operation time using batteries increases, but the nominal
output level is reduced.
18
Playback area
Repeat mode
Random playback ON/OFF
Equalizer (for SD playback only)
Display brightness
Time until screen dims
Time until screen turns off
Rescan automatically
o File data is automatically prepared
when an SD card is inserted.
Rescan manually
o Select this to prepare file data when
AUTO is off.
Setting reset
o Restores settings to their factory
defaults
Maximum volume
(output attenuation setting)
Time until power turns off automatically
Digital input/output setting
Power mode HIGH/LOW setting*
USB recharging function ON/OFF
Shows unit information

Download the latest firmware

Please visit the HA-P90SD product page from the TEAC Global Site and down-
load the latest firmware.
(If no firmware is listed, no firmware update is available.)
http://teac-global.com/
For details, see "Using the TEAC Global Site" on page 12.

Troubleshooting

If you experience a problem with this unit, please check the following items
before requesting service. If it still does not operate correctly, contact the
retailer where you purchased the unit.
The unit does not turn on.
e If the remaining battery charge is too low, the unit will not turn on.
Supply power to the unit through the DC plug or the USB micro-B port
e Has the automatic power saving function put the unit to sleep? Turn
the volume knob counterclockwise to turn the unit off once.
No sound is output.
e Use the volume knob to adjust the volume.
e Confirm that the connected device is playing back.
e Confirm the PHONES jack connection.