Update Process - SELFSAT SNIPE Manuel Utilisateur

4-2. Update Process

Using SNIPE Update Program, refresh the satellite data of your SNIPE.
i. Update the 9 satellites which are pre-stored.
①
Download the SNIPE Update Program
to your PC from our homepage
(www.i-do-it.co.kr).
②
Download the newest satellite data to
your PC from our homepage.
③
Connect the controller to your PC using
USB cable, then install the SNIPE Update
Program you downloaded.
④
Click "file open" on left-upper side on
program window to select folder which
contains downloaded satellite data.
⑤
Select folder and click the "OK" button.
12