Cleaning And Maintenance - ECOFOREST CM 01-04 Manuel D'installation Et Maintenance

An Ecoforest box is placed inside the fireplace. It contains the user manual, the installation and maintenance
manual, a keyboard and keyboard support (not for insert stoves), a WiFi antenna, a power cable, a room sensor and
a cleaning brush.
The room sensor and the power wire are connected at the rear of the stoveand in the right side.
Room sensor conection.

Power connection ~230/240V - 50Hz.

Room sensor.

Screw the WiFi antenna to the docking station. This magnet base must be stuck to the back of the boiler.
Once assembled, the unit has to remain in a vertical position.
Antenna.

Magnet connection base.

Place the magnet connection base with the antenna where appropriate. When possible, avoid the presence
of metal sheets around the antenna as the WiFi signal might be distorted.
WiFi upper view.
5.

CLEANING AND MAINTENANCE.

To ensure the correct operation of your boiler, the following cleaning and maintenance operations are
necessary at the indicated frequency. The boiler must always be cold.
The deterioration of the boiler parts by a lack of cleaning involves the loss of the two-year warranty offered
by ECOFOREST (see warranty section).
POWER CABLE, ROOM SENSOR AND WiFi ANTENNA CONNECTION.
WiFi plan view with no metal objects around.
35
Drawing 11
Drawing 12