Viglen Omnino Série Guide Utilisateur page 26

Concise User's Guide
Intel(R) Dual Display Clone
In addition to using a single display device (LCD or VGA monitor), you can use Intel(R) Dual Display Clone Mode
to drive two displays with the same content. To enable Dual Display Clone Mode:
1. Plug the VGA monitor into the external monitor (VGA) port.
2. Go to the Intel(R) 82865G Graphics Controller Properties control panel (see
and select Devices (tab).
3. Click the Intel(R) Dual Display Clone icon in the Devices tab (Note: this option is only available when you have
attached the monitor).
4. Choose one device to be the Primary/Secondary display.
5. Adjust the settings by clicking the Device Settings (button) if necessary.
6. Click Apply > OK and close the control panels.
Figure 11
Device Settings
(Dual Display Clone
Mode)
20 - Video Features
"Video Driver Controls" on page 18)