Clevo M660SE Guide Utilisateur page 22

Concise User's Guide
Application Quick Buttons
Note that the quick button driver is designed to allow use
of the Hot-Key buttons
tons in absence of the optional PC camera (only install
the quick button utility if the PC Camera is not in-
stalled). You will need to install the quick button utility
(see "Application Quick Buttons" on page
the functions.
The application quick buttons give instant access to user-
defined applications, with one quick button press. To
configure a program to open when the application quick
buttons (see Table 3, on page
low the instructions below. The application quick but-
tons will function as long as the program is running (the
icon will appear in the taskbar). If the program is not
running you will need to restart the computer.
1. Press a button or right-click the icon
taskbar.
2. Select Setup from the menu, scroll to AP1/2/3 and select
Custom.
3. An Open dialog box will appear on the screen.
4. Browse to the directory where the desired application.exe
program exists.
16 - Hot-Key Buttons
as application quick but-
33) to enable
14) are pressed fol-
in the
5. Double-Click on the program file or choose Open.
Application.exe
You will need to locate the actual application exe-
cutable (.exe) file, not just the shortcut. To find the
application right-click its shortcut on the desktop
and click Properties. Click the shortcut (tab) and
see where the executable file is located by clicking
the Open File Location (button).
Figure 5 - Application Quick Button Configuration
Screens