Medaxis debritom+ AeroGuard Nebbia Mode D'emploi page 6

Application
1. Unpack and unfold the AeroGuard „Nebbia".
Option: Place absorbent pad in bag, patient dressing can also be
disposed of directly in the AeroGuard „Nebbia"
2.
Put the AeroGuard „Nebbia" over the extremity (leg or arm,
head prohibited)
3. Position the handpiece passage in such a way that wound cleansing
can be carried out with the debritom+ without restricting the user's
movement
4.
Close the AeroGuard „Nebbia" tightly at the open end by means of the
closure band. Do not tighten the band too tightly!
5. Click the debritom + handpiece into the handpiece passage
6.
Option: direct light source onto wound
7.
Debride the wound in accordance with the operating instructions of
the mechanical wound unit
8. If visibility is unclear: spray the film with a water jet at a specified
minimum distance
9.
Open the closure band after debridement
10. Remove the AeroGuard „Nebbia" and dispose of it properly
8 AeroGuard ‚Nebbia' Instruction for use - EN
1. Option
3./4.
2.
5.
5./7./8.
9./10.
Absorbent pad
(not included)
AeroGuard ‚Nebbia' Instruction for use - EN 9