BabyGo carry cot Instructions De Montage page 22

Adjust or shorten the length of the
harness belt:
pull out the loop, slide the belt in
the desired direction and push up
the buckle to tighten.
1
Infant car seat with ISO-FIX base assemble:
place the infant car seat vertically on the base. The red button on the
front of the base will pop out and the seat will be automatically locked
(fig2).
To dissassemble:
press the red button on the front to release the carseat.
22
loop
buckle
26
2
a
canopy assembly:
fig a, push the canopy plug into the
seat slot, close the back zipper
canopy take off:
fig b, open the back zipper, pull
canopy plug out.
carry cot
27
28