Philips HD3720 Mode D'emploi page 8

ENGLISH
10
- Unopened kegs keep best when you store
them at a stable temperature. The cooler
you store the keg, the better.
- Maximum working pressure: 1.5 bar.
- Use the keg only for the HD3720/HD3610/
HD3600 PerfectDraft. Do not connect
other equipment to the keg.
- Do not use kegs from other suppliers than
the ones mentioned in this user manual
(see chapter 'Keg suppliers').
- Do not use damaged kegs in this appliance,
as this could harm the appliance. Return
a damaged keg immediately to the shop
where you bought it.
- The kegs are not stackable.
- Noise level: Lc < 70 dB(A).
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and
according to the instructions in this user manual, the appliance
is safe to use based on scientific evidence available today.
Before first use
Installing the appliance
1 Put the appliance on a horizontal, even and stable
surface. Leave at least 10cm free space around the
appliance for the best performance.
Note: Do not put the appliance in a place where it is exposed
to direct sunlight or to high temperatures (e.g. close to a
cooker or an oven).
2 To store excess cord, push it into the storage compartment
at the back of the appliance.
3 Insert the plug into the wall socket.
4 HD3720: install the drip tray.