Philips HD3720 Mode D'emploi page 19

Removing the cooling element
The cooling element inside the appliance contains a substance
that may pollute the environment. Therefore you must remove
the cooling element before you discard the appliance.
You can also take or send the appliance to a Philips service
centre. The staff of this centre will remove the cooling element
for you and will dispose of it in an environmentally safe way.
Only remove the cooling element when you discard the
appliance.
Be careful of the paste on the cooling element and adjacent
parts. If this paste ends up on your clothes, it causes a
permanent stain.
Remove the cooling element in the following way:
1 Unplug the appliance.
2 Slide the release button to the right to open the doors.
There are two holes near the hinges of the doors on either side.
3 Remove the four screws located in these holes with a
screwdriver.
4 Remove the back cover from the appliance.
5 Pull the cooling fan out of the appliance.
Now you see an aluminium plate with fins on it and with
,
two screw holes.
6 Undo the screws with a screwdriver.
ENGLISH
21