The applaince does not start.
•
Chenk the powerplug.
•
Check the power switch next to the thermostat.
•
Restore power by possibly replacing a faulty fuse or switch.
•
Please notify your service partner.
Temperature is too high, Despite the correct thermostat setpoint.
•
Check that the condenser is clean (see Chapter 4: Maintenance).
•
Check that fan rotates
•
Remove any objects that may block the air ventilation.
•
Check magnetic door seal, clean or replace if necessary.
•
Defrost evaporator.
•
Thermostat is defective. Please notify your service partner.
Temperature is too low, Despite the correct thermostat setpoint.
•
Thermostat is defective. Please notify your service partner.
Water spilage
•
Make sure doors / drawers close properly.
•
Check that any holes made during installation are well sealed.
•
Make sure the appliance is level.
•
Defrost regularly - perhaps additional manual defrost (see manual thermostat).
•
Please notify your service partner.
User manual
Defects
59