Listen To Music From Bluetooth-Enabled Devices; Troubleshooting - Altec Lansing AL-SNB301W-001-SNOW Mode D'emploi

• The player will also be disconnected when your device is moved beyond the operational range.
• If you want to reconnect your device to this player, place it within the operational range.
• If the device is moved beyond the operational range, when it is brought back, please check if the device is
still connected to the player.
• If the connection is lost, follow the instructions above to pair your device to the player again.

Listen to Music from Bluetooth-enabled Devices

If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to
the music stored on the device through the player.
If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player's remote
control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
To pause/resume play, press the
To skip to a track, press the

Troubleshooting

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this
unit, check the following points before requesting service.
No power
Ensure that the AC cord of the unit is connected properly.
Ensure that there is power at the AC outlet.
Remote control does not work
Before you press any playback control button, first select the correct source.
Reduce the distance between the remote control and the unit.
Insert the batteries with their polarities (+/-) aligned as indicated.
Replace the batteries.
Aim the remote control directly at the sensor on the front of the unit.
The unit does not respond when pressing any buttons
The unit may freeze up during use. Switch the unit off and then on again at the mains socket to reset the unit.
No sound output
Make sure that the unit is not muted. Press MUTE or VOL + to resume normal listening.
Ensure the audio setting of the input source (e.g. TV, game console, DVD player, etc.) is set to PCM mode
while using optical connection.
I can't find the name of this unit on my Bluetooth device for Bluetooth
pairing
Ensure that the unit is switched on.
Ensure that the Bluetooth function is activated on your Bluetooth device.
/PAIR button.
BF
, buttons.
H G
12