Aux/Mp3 Link/Optical Operation; Bluetooth Operation; Pair Bluetooth-Enabled Devices - Altec Lansing AL-SNB301W-001-SNOW Mode D'emploi

Aux/Mp3 Link/Optical Operation

1 Ensure that the unit is connected to the TV or audio device.
2 Press the / button on the main unit or the OPTICAL, AUX, MP3 LINK buttons on the remote
control to select the desired mode.
3 Operate your audio device directly for playback features.
4 Press the VOL+/– button to adjust the volume to your desired level.
Tip: In OPTICAL mode, if there is no sound coming out of the soundbar and the optical indicator light is
flashing fast, make sure the audio setting of your source player (e.g. DVD player, game player, TV) is set to
PCM with optical input.

Bluetooth Operation

You can listen to tracks from a media device if connected to the unit via Bluetooth.

Pair Bluetooth-enabled Devices

The first time you connect your Bluetooth device to this player, you need to pair your device to this player.
Note:
• The operational range between this player and a Bluetooth device is approximately 8 meters (without any
object between the Bluetooth device and the unit).
• Before you connect a Bluetooth device to this unit, ensure you know the device's capabilities.
• Compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can reduce the operational range.
• If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode
automatically.
/
1 Press the / button on the main unit or the BT (Bluetooth) button on the remote control to select
Bluetooth mode. The Blue indicator will flash slowly.
2 The system has entered pairing mode.
Press and hold the BF /PAIR button on the remote control to be searchable. After the "Pairing" voice
prompt and the Blue indicator will flash rapidly.
3 Activate your Bluetooth device and select the search mode. "SNOW" will appear on your Bluetooth
device list.
4 Select "SNOW" in the pairing list. After the "Paired" voice prompt, the system is successfully connected
and the Blue indicator will light up solidly.
5 Play music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can :
• Switch to another function on the unit.
• Disable the function from your Bluetooth device. The Bluetooth device will be disconnected from the
soundbar after the "Disconnected" voice prompt.
• Press and hold the " BF /PAIR" button on the remote control.
Tips:
• Enter 0000 for the password if necessary.
• If no other Bluetooth device pairs with this player within two minutes, the player will recover its previous
connection.
11