dirna Bergstrom Bycool DINAMIC 1.1 Instructions De Montage page 37

DINAMIC 1.1
Assemble the protector frame with the
15
previously removed (4) 6/100x30 Allen screws.
Tilt the cabin and remove the fastening nuts
16
from the right side protector of the engine.
Insert the power cable inside the protector, as
close as possible to the floor of the cabin, and
pass through the original gap. Reassemble the
original protector nuts.
15
37
16
Place corner guards
to protect wiring
EN
®
15