dirna Bergstrom Bycool DINAMIC 1.1 Instructions De Montage page 35

DINAMIC 1.1
Position assembly on the couplings, mark and
C
drill (4) Ø4 holes and protect with the rustproof
paint supplied. Do not drill the upper hole (*).
Stick seals supplied on the protector adjusting
D
them so that when placed on the cab, they fit
snugly over it, to protect water from entering
the coupling and assemble with (4) 4.8x13 self-
tapping screws.
D
35
D
D
EN
®
C