dirna Bergstrom Bycool DINAMIC 1.1 Instructions De Montage page 30

DINAMIC 1.1
EN
Position the template in the most ideal place on
1
the right of the cabin, ensuring the boreholes
are in flat areas, and mark the two lower
boreholes.
It is important to only mark these two
boreholes, since the base may not coincide
with the template due to the material
contracting.
Make (2) Ø9 boreholes, protect with the
2
supplied rustproof paint and position (2) M6
rivet nuts.
CONDENSER AND PIPING ASSEMBLY
1
2
Caution: Bear in mind the length of the pipe;
!
it is connected to the evaporator unit.
30
®
1
2
2