Numark AVM01 Manuel D'utilisation Du Propriétaire page 4

Top Panel Overview
1. Mic Fader: Adjusts the audio level of the microphone input.
2. Line Fader: Adjusts the audio level of devices connected to the Line In jacks.
3. Audio 1/2 Fader: Controls the overall level for the Source 1 and 2 audio inputs.
4. Audio Crossfader: Fades audio between the Audio 1 and Audio 2 inputs.
5. Master Fader: Controls the Master audio output level of the mixer.
6. Cueing Section: Controls the headphone output (see Cueing Section below). There is also a
¼ stereo headphone jack here.
7. Video Crossfader: Fades between the A and B video busses or controls the video effect,
depending on the mode. With Auto Fade on, this slider adjusts the speed of fade.
8. Bus A FX: Controls video effects on Bus A.
9. Auto Fade Control: Performs wipes and fades automatically at the speed selected by the
Video Crossfader. The top button turns Auto Fade on and off. The bottom button starts the
fade.
10. Bus B FX: Controls video effects on Bus B.
11. Crossfader Bus Selection: Assigns inputs to the video busses. The Bus A controls are
located on the left, Bus B on the right. Any video source can be routed to Bus A or Bus B.
Both busses can also be assigned to the same video source for layered effects. To select
Video-3 or Video-4, Press both the Background button and the desired video button
simultaneously. A background color can be routed to any Bus using the Background button.
12. Background Select: Selects the background color for the effects.
13. Video Fade Modes and Options: Controls fades, wipes and Picture-In-Picture.
14. Master Audio Output Meter: Shows the master audio output level as controlled by the
Master Fader.
4