Dörr RS Notice D'utilisation page 6

Nomenclature
For Nikon
For Canon
Hot Shoe
X-Sync Socket
Group Button
Group Indicator
Channel Selector
Switch
LED Indicator
For Nikon
For Canon
Hot Shoe Trigger Pin
09
Test-/Shutter Button
USB Socket
3.5mm Sync Socket
Antenna
Eyelet
Mode Switch
Battery
Compartment
Power Switch
Mounting Foot
Description of Components
Antenna: soldered external RF antenna
Eyelet: to fix the wrist strap
Test/Shutter Button: Flash test button or 2 steps shutter
remote control
Channel Selector: 4 different channels for
communication
LED Indicator: Power on, wireless communication
or command indicator
Battery Compartment: for 2 AA batteries
¼" Tripod Socket: to mount the transceiver on a tripod
X-Sync Socket: no function in transmitter mode,
output signal with the transceiver
in receiver mode
Group Button: 3 individual buttons for group A/B/C
Power Switch: The transceiver is switched on in
position [
Hot Shoe Trigger Pin: When mounting the device on a
camera hot shoe it will be in sender
mode (TX).
3.5mm Sync Socket: For remote camera shutter and
studio flash triggering
USB Socket: Firmware Upgrade or DC 5V power
supply
Mode Switch: Set the transceiver installed to your
camera to sender mode (TX).
Devices installed on flash units,
must be set to receiver mode (RX).
¼" Tripod
Socket
]
10