Basic Operation; Applications - Storch Quick Mixx 25 Mode D'emploi

Switch gear
The Quick Mixx 50 and Quick Mixx 50 Plus have a gear selector switch on the casing. For high viscosity materials select
the low speed. Before seting the spped switch off the tool. Then press the gear sleector switch against the spring tension
and push up or down to adjust the speed. Ensure that the gear selector switch locks into place. Slightly turning the spinlde
makes it easier to fully engage the gear. See figure 2.
Please switch the tool off before changing
the gear (OFF).

Basic operation

Applications

Effective control of this machine requires two-handed operation for maximum protection and resistance to the start-up
and operating torque. To avoid loss of control and thereby any damage or injury, the tool should be held properly and
securely with both hands. Protect your eyes from injury with safety glasses or goggles.
Keep the mains cable behind the operator and the working area,
to prevent the cable being caught up in the mixer.
Handles
The soft handles are designed to ensure maximum
grip. They avoid strain, even after prolonged use.
Translation of the original instruction
Speed adjuster
Fig. 1
Gear selector
switch
(only Quick Mixx 50
+ Quick Mixx 50
Plus)
Fig. 2
46