Changing Camera Settings - Dörr SNAPSHOT LIMITED BLACK 8MP TFT Notice D'utilisation

05.2 Inserting the SD/SDHC memory card
CAUTION
Only use SD/SDHC memory cards from 4GB to max. 32GB. Using a micro SD card in combination with an adapter may lead to
malfunctions. Make sure that the SD card is formatted and unlocked.
Unlock the memory card:
Insert a SD/SDHC memory card (optional) with the label facing upwards into the SD card slot (15) until it snaps into place.
How to format the SD card with the camera, please read chapter 09.7.
06 | OPERATION
Switch the slide control (08) to SETUP position. The LCD display (07) shows the basic settings:

06.1 Changing camera settings

In order to change the camera settings, switch the slide control (08) to SETUP position and press the MENU button (09).The LCD
display (07) shows a list of various menu options:
17
Camera symbol
5M (factory setting)
Battery symbol
[00000/00000m]
Press the navigation buttons (10)  or  to switch between the registers (CAM, PIR, SYS).
Press the navigation buttons (10)  or  to select the menu point.
The selected menu point is marked
Press the navigation buttons (10)  or  to change the menu point. To save your settings press the
OK button (11). To leave setup without saving, press the MENU button (09).
Single picture mode
Resolution 5 Mega Pixels (3 MP / 5 MP / 8 MP selectable)
Battery status
Stored pictures/free capacity
white.
doerr-outdoor.de