Applications; Charging Method - Hitachi ET 18DM Instructions De Sécurité Et Mode D'emploi

English
SPECIFICATIONS
Input power source
Charging time
Charger
Weight
ADAPTER (ET18-18A)
Applicable cordless tools DS18DMR, C6DC2, CR18DV, UB18D
Weight

APPLICATIONS

For charging the HITACHI batteries types EB9, EB12, EB14, EB18 series.

CHARGING METHOD

NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged.
WARNING:
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
EB9S
EB12S
EB9B
EB12B
EB1220BL
Fig. 2
8
All manuals and user guides at all-guides.com
Single phase: AC120V 60Hz
Approx. 9 minutes ............... EB9S, EB12S
Approx. 12 minutes ............. EB9B, EB12B, EB1220BL
Approx. 14 minutes ............. EB14B, EB18B, EB1820, EB1820L
Approx. 28 minutes ............. EB1830H, EB1830HL
Charging voltage .................. DC 9.6 – 18V
Charging current .................... DC 12A (9.6 – 12V), 9A (14.4 – 18V)
3.5 lbs (1.6kg)
3.1 lbs (1.4kg)
EB18B
EB1820
EB14B
EB1830H
EB1820L
EB1830HL
1. Insert the plug of battery charger into
the receptacle.
When the plug of battery charger has been
inserted into the receptacle, pilot lamp will
blink in red. (At 1-second intervals)
WARNING:
Do not use the electrical
cord if damaged. Have it
repaired immediately.