IFM Electronic efector 200 OG5128 Notice De Montage page 5

Operation
Check whether the unit functions properly.
Light-on mode or dark-on mode depend on the type of receiver and
cannot be set!
• The green LED lights when the unit is ready for operation.
• Light-on mode – the output is switched when the object is not pre-
sent. The yellow LED is lit.
• Dark-on mode – the output is switched when the object is present.
The yellow LED is lit.
Maintenance
Keep the lens of the sensor free from soiling. For cleaning do not use
any solvents or cleaning agents which could damage the plastic lenses.
5