Battery Replacement (For Remote Control) - Bigben LUMINOUS SPEAKER Instructions D'utilisation

time, for example, last time you turned off the light on "RED" mode,this time you press the ON/OFF
button, the mode will still be on "RED" mode.
4. Bluetooth function button: press this button to switch into bluetooth function
5. AUX IN function button : press this button to switch into AUX IN function.
6. USB player function button : press this button to switch into USB player function
7. Color selection button: When the light is on, press this button to choose your favorite color as
shows on the remote control (six colors).
8. Color selection button: when the light is on, press this button to choose your favorite colors
(Total 7 colors)
9. Music flash button: the light will flash when music is playing
10. Smooth button: 7 colors scrolling automatically.
11. White color button: press this button, speaker will display white color
12. Previous button: when the Bluetooth or USB key is connected and music is on, press this button
to select previous music.
13. Next button: when the Bluetooth or USB key is connected and music is on, press this button to
select next music.
14. Pause and play: when the Bluetooth or USB key is connected and music is on, press this button
to play or pause the music.
15. Voice- and +: when the bluetooth or USB key is connected and and music is on, press the "-"
to reduce volume, press "+" to increase volume.

BATTERY REPLACEMENT (FOR REMOTE CONTROL)

If remote control fails to activate the light, replace the battery.
Move the slot besides the battery cover to right side, then battery cover will pop out, then take out
the battery and replace a new one.
Pay attention to the polarity of battery on the cover and cover direction when installing them back
to the remote control.
Warning!
Make sure that battery is inserted the right way and with the right polarity
Remove exhausted battery from the product
The supply terminals should not be short-circuited
Dispose of battery safely
Type
Speaker
Peak Speaker
RMS Power
EIRP
(for Rabbit, Unicorn, Cat,
Panda,Koala)
Power Consumptions
Power Input
Speaker + Tweeter
Impendance
S/N Ratio
Battery Type
Output (V,A)
Bluetooth Pairing Name
Specification Type
2.25" 5W Charging Timer
15W Playing Time
3W Bluetooth Version
EIRP
4.89dBm (3.08mW)
(for Panda2, Whale)
0.2W (lights off)
Bluetooth Frequency
1.5W (lights on)
USB 5V,1A Speaker Frequency
4O Input
=50dB Driver
2200mAh-Lithium
Battery Capacity
Battery
3.7V, 2.2A, 8.14Wh Transmission Distance
Luminous / BTLS.... Battery Weight
- EN 4 -
Specification
2-3 hours
100% Volume: around 2.5 hours
50% Volume: around 6 hours
5
-2.46dBm(0.57mW)
2.40-2.80 GHz
80Hz-20kHz
DC 5V
2.25" 4 Ohms speaker
2200mAh
10m
47g