EIBENSTOCK ESM 1310 Notice Originale page 19

movements. Never put on the whole surface of the sanding disc. Always
grind with a small angle between grinding disc and the surface of the work
piece.
Usage of abrasive belts
Mount the expansion wheel on the machine. Put the abrasive belt around
the work piece you want to grind. Connect the ends of the abrasive belt
and put it on the expansion wheel.
Attention!
Never load the abrasive belt so much that it rips.
Working Advice
When sanding, the removal capacity and the surface quality are mainly
determined by the abrasive selection as well as through the preselected
speed. Work with the lowest possible sanding pressure in order to increase
the service life of the abrasive. Excessively increasing the sanding
pressure does not lead to a higher sanding capacity, but to more wear of
the power tool and the abrasive. Work with moderate feed and perform the
sanding parallel and overlapping with respect to the sanding paths.
Use only original EIBENSTOCK sanding accessories.
Only proper abrasives achieve good sanding capacity and give the power
tool longer service life.
Do not clamp power tools in the saw stand. Clamped power tools and
sharp-edged application tools may result in serious injury.
Care and Maintenance
Before the beginning of the maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced
personnel. After every repair the machine has to be inspected by an
electric specialist. Due to its design, the machine needs a minimum of care
and maintenance. However, the following points have to be observed:
The machine and the ventilation must be cleaned in regular intervals
according to degree of contamination by means of compressed air.
During work, please pay attention that no particles get inside the
machine.
In case of failure, a repair has to be carried out by an authorised
service workshop.
Our after-sales service responds to your questions concerning
maintenance and repair of your product as well as spare parts.
EIBENSTOCK's application service team will gladly answer questions
concerning our products and their accessories.
19