Parts Description; Before Use - Tristar TR-2552 Mode D'emploi

EN INstruc tIoN maNual
(*) Competent qualified electrician: after sales department of the producer or
importer or any person who is qualified, approved and competent to perform
this kind of repairs in order to avoid all danger. In any case you should return
the appliance to this electrician.

PartS deScriPtion

1. Cutting element
2. Thinning guide
3. Setting selector
4. On/off slide
5. Charging light
6. Docking station
7. Comb (0.5mm-2.5mm)
8. Comb (3mm-18mm)
9. Comb (21mm-36mm)
10. Cleaning brush
11. Lubricating oil

Before uSe

charge
Charge the appliance for at least 16 hours before you use it for the first
time and after a long period of disuse. When the appliance is fully charged,
it has a cordless operating time of up to 45 minutes. Do not charge the
appliance for more than 24 hours.
1. Make sure the appliance is switched off.
4
7
8
9
10
11
2. Insert the small plug into the socket of the appliance and put the
adapter in the wall socket.
3. After a few seconds, the charging light goes on to indicate that the
appliance is charging.
note: The charging light does not change colour and does not go out
when the appliance is fully charged.
1
uSe
2
PrePare Before cut ting
1. Only use the appliance on clean and dry hair. Do not use it on just
washed/wet hair.
3
2. Make sure that the head of the person whose hair you intend to cut is
4
at the same level as your chest. This ensures that all parts of the head
are clearly visible and within easy reach.
3. Comb the hair in the growth direction.
5
cliPPing with comB
6
1. The appliance comes with three combs for different hair lengths.
The minimum remaining hair length is 0.5 mm and the maximum
remaining hair length is 36 mm.
2. Put the chosen comb into the appropriate slots on either side of the
appliance, then click the mounting tab on the appliance.
3. To set the comb to the desired setting, turn the setting selector and
the comb will slide to the desired hair length setting. The setting
indications on the appliance shows the selected setting.
4. Turn on the appliance.
5. Move the appliance through the hair slowly. To clip in the most
effective way, move the appliance against the direction of hair growth.