Proper Use; Technical Data - EINHELL GC-PM 46/1 S B&S Mode D'emploi D'origine

•
1x cable clip
•
Star nut (2x)
•
Long screw (2x)
•
Short screw (2x)
•
Spark plug wrench
•
Briggs & Stratton manual
•
Countersunk head screw (2x)
•
Nut (4x)
•
Original operating instructions
•
Safety instructions

3. Proper use

The equipment may only be used for the tasks it
is designed to handle. Any other use is deemed
to be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
The petrol lawn mower is intended for private use
i.e. for use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of
50 hours, during which time the machine is pri-
marily used to maintain small-scale, residential
lawns and home/hobby gardens. Public facilities,
sporting halls, and agricultural/forestry applica-
tions are excluded.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
The operating instructions as supplied by the ma-
nufacturer must be kept and referred to in order
to ensure that the lawn mower is properly used
and maintained. The instructions contain valuable
information on operating, maintenance and servi-
cing conditions.
Warning! Due to the high risk of bodily injury
to the user, the petrol lawn mower must not be
used to carry out the following work: Trim bushes,
hedges or shrubs, to cut scaling vegetation, plan-
ted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up
tree or hedge clippings. Moreover, the lawn mo-
wer may not be used as a power cultivator to level
out high areas such as molehills.
For safety reasons, the lawn mower may not be
used as a drive unit for other work tools or toolkits
of any kind.
Anl_GC_PM_46_1_S_BS_SPK7.indb 20 Anl_GC_PM_46_1_S_BS_SPK7.indb 20
GB

4. Technical data

Note:
The enclosed manual from Briggs & Stratton pro-
vides detailed technical data on the engine!
Engine
type: . Single cylinder four-stroke engine, 125 ccm
Engine output (2900 min
Working speed n : ...............................2900 min
0
Fuel: ..................................................petrol (E10)
Cutting height adjustment: ... central, (30-80 mm)
Cutting width: ......................................... 460 mm
Weight: ........................................................28 kg
Danger!
Sound and vibration
L sound pressure level ..................... 74,1 dB(A)
pA
K uncertainty ........................................ 1.83 dB
pA
L sound power level ........................... 96 dB(A)
WA
L sound power (measured) .............. 94.1 dB(A)
WA
K uncertainty ........................................ 1.83 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Vibration emission value a
K uncertainty = 1.5 m/s
Long work periods should be avoided due to the
development of high noise and vibration levels.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
- 20 -
): ......... 1.65 kW/2.2 hp
-1
-1
= 6.49 m/s
2
h
2
26.09.2019 09:28:45 26.09.2019 09:28:45