Preparing The Cables - Pioneer PDK-TS05 Mode D'emploi

Preparing the Cables

Use the enclosed cable binders to bind the cables.
Note
Be very careful not to apply force to the bases of the cables.
When installing speakers on both sides of the
plasma display
When installing speakers at the bottom of the
plasma display
20
En
Using the cable binders
1
Passing a cable binder though the cable
binder holder on the top of the rotating
platform of the stand.
Cable binder
2
Gathering cables and placing them on the
cable binder.
3
Passing the cable binder through the hole
on its end.
4
Pulling the end of the cable binder to
secure the cables.
Removing a cable binder
If the secured part is removed
from the cable binder hole, it is
unlocked.
Cable binder holder
Hole
Secured
part