Technical Specifications - Franke 7612982185335 Notice De Montage

6.

Technical Specifications

Product group:
EMC:
Electrical safety:
Protective system
Protection class:
Test voltage:
Dimensions (W x H x D):
Ambient temperature:
Cooling:
Humidity:
Storage temp.:
Long-term storage:
Input
Input AC:
Rated current:
Overvoltage protection:
Connections:
Output
Output DC (SELV):
Rated current:
Ripple:
Efficiency:
Current limitation:
Connections:
Digital connections
Connection facilities:
Connections:
Primary switched-mode voltage regulator (single
phase, primary switched built-in power supply with
Ethernet-CAN coupler)
EN 61000-6-3 (electromagnetic emission)
EN 61000-6-2 (electromagnetic immunity)
EN 60950
IP 20
I
4.2 kV DC
144 × 144 × 151 mm
-10°C to 60°C / 70°C for 10 min
Natural convection
100% relative humidity
There must be no dew formation when the system is
to be commissioned.
-40°C to 80°C
To maintain the condensers, apply mains voltage to
the device for at least 5 min. every two years.
Rated voltage 100 – 240 V AC / 50 – 60 Hz
0.6 A at 230 V AC
Varistor in the input circuit
3 x 1.5 mm²
Rated voltage 24 V DC
Range 22 – 28 V (preset to 24 V)
2.5 A at 24 V DC
150 mVpp (at 20 MHz)
89 %
from 1.1 × I
Rated
WAGO 734 Series multi-connector system for max.
1.5 mm²
Ethernet, USB 2.0, UPS
WAGO 734 Series multi-connector system for max.
1.5 mm²
- 6 -