Cembre SD-15PR-ECO Notice D'utilisation Et Entretien page 5

1.7) "MND" spindle: featuring an automatic quick lock mechanism suitable for augers with Ø
14 mm shank.
"MND 1" spindle, available as an optional accessory, is suitable for augers with Ø 16 mm shank.
1.8) PRM-U detachable guard: stainless steel telescopic element, controlled by the return
springs, which provides protection for the auger. The lower end is threaded for attachment of
the TPM end piece.
1.9) TPM... end piece: threaded centreing device for attachment to the PRM-U guard. Alterna-
tive end pieces are available, with diff erent diameters, to suit diff erent size bushes (see § 3.2).
1.10) Return springs: to assist the retraction of the auger from the sleeper on completion of
the drilling operation and to reduce operator eff ort.
1.11) Forward/reverse selector: allows reverse the rotation direction of the spindle to disen-
gage the auger when blocked in the wooden sleeper (see § 4.1.4).
2. ACCESSORIES SUPPLIED WITH THE DRILLING MACHINE
The drill is supplied complete with the
"Accessories Kit" code: 6001554, containing:
– 1 pc 4 mm Allen key.
– 1 pc spark plug key.
– 1 pc measuring cylinder for fuel preparation.
– 2 pcs guard retaining nuts (spare parts).
3. ADDITIONAL ACCESSORIES AVAILABLE
3.1) Auger with Ø 14 mm shank.
TYPE
(mm)
PV 100
PV 130
PV 140
PV 160
PV 170
PV 180
PV 190 19 (3/4")
PV 200
PV 210
PV 220
PV 250
5
ø
10
13
14
16
17
Correct operation of the machine and its
18
safe and rapid release of the augers, in case of
need, are guaranteed only by using Cembre
20
original PV range augers.
21
22
Always use augers with total length of 325 mm, to prevent any
25
malfunction of the machine.
325 mm
PV160
ENGLISH