Teac NP-H750 Mode D'emploi page 54

6
Click Browse..., and then select the desired
firmware file (.fw).
7
Click "Upload".
If the following message appears, click "OK", and then
return to Step Check the file and its name.
5
54 54
Updating the firmware (2)
c
8
Click "OK" to start the firmware update.
When the update starts, the following message will
appear.
p The update status is also displayed on the unit.
When the firmware update is completed, the unit will
restart automatically.
9
Disconnect the power cord from the outlet,
connect it again, and then press the STANDBY/
ON button to turn the unit on.