Amica PG4V 0 Série Mode D'emploi page 20

Install the hob in a furniture worktop PG4**
• To install a worktop with a thickness of 38 mm, use 4 "A" fixing brackets. Installation is
shown on Fig. 2 and in Fig. 3. To install a worktop with a thickness of 28 mm, in addition
to "A" fixing brackets, use additional 4 wooden elements with dimensions of 15x15x50
mm. Installation is shown on Fig. 4 and in Fig. 5.
• Check the hob gasket for any defects and correct fitting to the hob.
• Slightly tighten the fixing brackets from the underside of the worktop.
• Clean the worktop, place the hob in the opening and push into worktop opening.
• Put the fixing brackets vertically to the edge of the hob and tighten.
5
2
1
1. Worktop
2. Bolt
3. Fixing bracket
4. Hob
5. Hob
3
4
2 3
560
290
290
4
1
1. Worktop
2. Bolt
3. Fixing bracket
4. Hob
5. Hob
6. Wooden element
5
20
5 4
15
2 3
6
560
290
240
50