Installing The Settings Panel For Mac Os X - Tascam US-2x2 Mode D'emploi

5. Next, select the desired language and click the
"OK" button.
6. When the Installshield Wizard screen appears,
click the "Next" button.
7. Read the contents of the License Agreement,
and select "I accept the terms in the license
agreement" if you agree to the terms.
Then, click the "Next" button.
8. Next, click the "Install" button to start installation.
9. The following screen appears when installation
has completed.
Click the "Finish" button.
The installer will quit and the computer will
restart.
CAUTION
•
When installing the driver, a warning might
appear with a message such as, "The software
you are installing for the hardware has not
passed Windows Logo testing to verify its
compatibility with Windows." If this message
8
TASCAM US-2x2/US-4x4
appears, click "Continue Anyway" to proceed
with the installation.
Installing the Settings Panel for Mac
OS X
NOTE
•
Install the Settings Panel on the computer before
connecting the unit to it with the USB cable.
•
Depending on the Gatekeeper setting, a warning
message might appear during installation. For
information about Gatekeeper, see "Note about
Gatekeeper" in "3–Installation" of the Reference
Manual.
8 Settings Panel installation procedures
1. Download the latest Settings Panel for the
operating system you are using from the TEAC
Global Site (http://teac-global.com/) and save it
on the computer to be used with the unit.
2. Double-click "US-2x2_US-4x4 Installer.dmg",
which is the saved disk image file for the driver,
and double-click "US-2x2_US-4x4 Installer.pkg"
inside the folder that opens.
NOTE
Depending on the computer's settings, the
downloaded zip file might not have been
uncompressed automatically. In this case,
uncompress the zip file first and then double-
click the disk image file.
3. When the installer starts, click the "Continue"
button.
4. Next, select the desired language and click the
"Continue" button.