Care And Maintenance; Water Drainage - Danby Designer DPAC120011H Guide D'utilisation Et Soins De Propriètaire

Care and Maintenance

WATER DRAINAGE

During Dehumidifying modes, remove the drain plug A from the back of
the unit (Fig.21), install the drain connector (5/8" universal female
connecter) with 3/4" hose (locally purchased).
when the level of the bottom tray reaches a predetermined level, the unit
beeps 8 times, the digital display area shows "P1" and the unit stops
operating. Carefully move the unit to a drain location, remove the bottom
drain plug and let the water drain away (Fig.24). Restart the machine until
the P1 symbol disappears. If the error repeats, call for service.
NOTE: When the relative humidity is less than 80%, the water drainage is
not needed during cooling operation. If performing above water drainage
during cooling operation, the cooling efficiency will be reduced.
NOTE: When operating or draining water always protect carpeting or
floors from possible water spillage.
Fig.21
Drain outlet A
Drain outlet B (Keep the drain outlet B plugged)
16