GE GTH21 Série Manuel D'utilisation Et D'installation page 24

REVERSING THE DOOR SWING
REVERSING DOOR HANDLES –
7
TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT SIDE OF THE
FREEZER DOOR
1. Remove the two screws
securing the top end of
the handle with a Phillips
screwdriver.
2. Rotate the
handle out
and lift off of
the mounting
screw on the
refrigerator
door.
3. Remove the mounting
screw from the surface
of the refrigerator door.
Installation Instructions
(CONT.)
24
REVERSING DOOR HANDLES –
7
TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT SIDE OF THE
FREEZER DOOR (CONT.)
4. Insert the mounting screw into the surface of the right
side of the freezer door with
a Phillips screwdriver.
5. Align the handle with
the mounting screw.
6. Rotate the handle.
7. Secure the bottom end
of the handle by inserting
two screws and tightening
them with a Phillips screwdriver.
NOTE: Do not over-tighten.