Technical Specifications - Tokai LAR-11 Manuel D'utilisation

6. TROUBLE SHOOTING
NO POWER OR NO
SOUND
MUCH NOISE IN
BROADCASTS
PRESET STATION IS
RESET
USB or SD CARD IS
CONNECTING BUT NO
SOUND

7. TECHNICAL SPECIFICATIONS

Supply Voltage
Current Consumption
Power Output
FM Frequency range
Unit Dimensions
Net weight
IMPORTANT:
If you want to leave your USB stick or memory card connected to your car audio, it is IMPORTANT to
switch off the device before turning off the ignition key of your car otherwise sometimes the sound will
be cut off.
In case no sound; please reset your car radio by folloing the RESET instruction (see RESET operating
instructions in the manual).
The car's ignition switched off
Cable is not correctly connected.
Fuse is burnt
Station or signal is too weak.
Battery cable is not correctly
connected.
USB or SD card connection is not
good.
USB or SD car is damaged or no
music file inside.
DC 12 V. Negative Ground
5A
4x 45Watts
87.5MHz -108MHz
178[W] X 165[D] X 50[H] mm.
0.7kg
If the power supply is properly connected to the car
accessory, switch your ignition key to ACC or ON
Check connection.
Replace the fuse.
Select other stations of stronger signal level.
Connect the battery cable to the terminal that is
always live.
Take it out and insert again.
Change to another USB or SD or record music inside
it.
10