Tokai LAR-11 Manuel D'utilisation page 10

5. Preset 3 / REPETITION
a) In Radio mode
Press briefly to recall the station programmed in 3
position on the current frequency band.
b) In SD/USB mode
Press the RPT button once to play the current track
repeatedly, and the RPT indicator will be visible on the
LCD display.
6. BAND / AMS
A) In Radio mode
Press BAND/AMS button briefly to select the radio
broadcasting band you would like to hear. The FM band is
toggled cyclically through the tuning bands:
F 1  F 2  F 3
b) In SD/USB mode
Press and hold BAND/AMS button for more than 1
second, the radio searches from the current frequency
and checks the signal strength level until 6 stations are
found. And then the 6 stations frequencies are preset to
the corresponding preset memory numbered bank. The
auto-storage operation is implemented in the each
selected band. When the auto-storage operation is
finished, the radio executes the Preset Scan.
7. LCD DISPLAY
8. USB compatible Port
In order to play the file in the USB stick, turn over the
plastic cover cap then insert the USB stick into the USB
socket. The system will change into the USB mode
automatically, and then play the first file in the USB.
9. SD SLOT
When you need to play the file in the SD card, insert the
SD card into the SD card slot. The system will change into
the SD mode automatically, and then play the first file in
the MMC/SD.
10. RESET
Before operating the unit for the first time, or after
replacing the car battery or changing the connections,
you must reset the unit. Press this button with a cuspidal
object. This operation will erase the clock setting and
some stored contents.
11. AUX IN
Press the mode button to select auxiliary input playing
mode. Then you can connect any matched external audio
device to this socket. Use the volume knob to adjust
volume.
12. MUTE
rd
Press MUTE to activate the MUTE function: the sound is
cut. To restore the sound, press MUTE again.
13. CLOCK
Press and hold the CLK button to enter clock setting
mode. The hours flash, use the  /  buttons to set the
hours. Press CLOCK button to confirm and to set minutes,
use the key  /  to set the minutes. Press CLK again
to confirm the settings.
Briefly press the CLK button to display the current time.
14. +10 / Preset 6
a) In RADIO mode: press briefly to recall the station
programmed in 6
band.
b) In SD/USB mode: press this buttons to move up 10
tracks at a time. When the remained total tracks are lack
of 10, the both buttons are inactively.
15. -10 / Preset 5
a) In RADIO mode: press briefly to recall the station
programmed in 5
band.
b) In SD/USB mode: press this buttons to move down 10
tracks at a time. When the remained total tracks are lack
of 10, the both buttons are inactively.
16. Preset 4 /RANDOM
a) In RADIO mode: press briefly to recall the station
programmed in 4
band.
b) In SD/USB mode: press the RDM button to play all
tracks on disc in random order, and the RANDOM will be
visible on the LCD display. In the process of RDM, press
RDM button again to stop playing in random order and
the LCD will display OFF.
17. TUNE/SEEK /SKIP FORWARD - BACKWARD
a) In RADIO mode: press the  or  button briefly to
automatically tune up/down for the radio station
frequency of the strongest signal. Press and hold the
 or  button for longer than 2 seconds, to manual
tune up/down for the desired radio station frequency
step by step.
b) In USB /SD playback mode: press the  button briefly
to play next track and press the  button briefly to play
the previous track.
9
TH
position on the current frequency
TH
position on the current frequency
TH
position on the current frequency