BoomToneDJ Ludipocket Mode D'emploi page 14

A. By Master/Slave built-in program function.
By linking the units in master/slave connection, the first unit will control the other units
to give an automatic, sound activated, synchronized light show. This function is good
when you want an instant show. You have to set the first unit in Automatic, sound
activated mode. Its DMX input jack will have nothing plugged into it. The other units will
have to select SL1 or SL2 , Their DMX cables plugged into the DMX input jacks (daisy
chain) and the slave led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1
to 512 channel so that the units can receive DMX signal.
Press the MENU, then find Addr, press ENTER, when the 1 is showing on the display.
Pressing ENTER. Use DOWN and UP button change the DMX512 address.
13 channels DMX Protocole :
Channel
0-255
CH1
0-255
CH2
0-255
CH3
0-255
CH4
0
1-250
CH5
251-255
0
1-7
CH6
8-140
141-255
0-15
CH7 16-128
129-255
CH8 0-255
CH9 0-255
CH10 0-255
0-255
CH11
0-255
CH12
0-249
CH13
250-255
Value
Tilt 1
Tilt 2
Tilt 1 &Tilt 2 speed from slow to fast
Dimmer
No function
Strobe from slow to fast
No function
Dimmer mode
Color fade mode
Color Jump mode
Sound active mode
CH1 to CH7,CH9 to CH14 available
Auto run mode, the other channel not available
Sound mode, the other channel not available
Run speed and sound sensitive adjust of CH6&CH7
Dimmer Red1,Red2,Red3......Red8
Dimmer Green1,Green2,Green3......Green8
Dimmer Blue1,Blue2,Blue3......Blue8
Dimmer White1,White2,White3......White8
No function
Reset
Function
14