Breguet 5460 Mode D'emploi page 6

5460/5461/5469
"H "
ÉRITAGE CHRONOGRAPH
The crown has three positions:
1. Neutral position
2. Rapid date correction
3. Time-setting position
, , -
DATE SELF WINDING
Starting the watch
Crown in position 1. This position
enables manual winding of the
self-winding movement, meaning
winding by rotating the crown
upwards ( ), about 30 to 35 turns.
L L
Afterwards, when worn on the wrist,
the watch is automatically rewound.
If not worn, it will stop after about
45 hours.
, -
WATER RESISTANT TO
Setting the time
Pull the crown out to position 3. Turn
the crown upwards (
hands forwards to the date change at
midnight. Then set the watch to the
desired time by moving the hands for-
wards. (Please note: if you set your
watch during the afternoon, you must
first move the hands past noon). For
accurate time-setting, ensure that the
last operation was done in a clock-
wise direction. Then push the crown
back to position 1. After this opera-
tion, rotate the crown downwards (
to make sure it turns freely.
30
M
) to move the
L L
)
M M