Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
PROBLEMS
---------------------------------
•
The appliance won't
start.
---------------------------------
•
Dust is blowing out of
the safety grates .
---------------------------------
•
Reduced efficiency.
---------------------------------
•
The rpm rate of the
motor is noticeably
higher.
---------------------------------
•
The water/detergent
solution is not
spraying evenly.
Do not dispose of electrical appliances with household waste!
In compliance with European Directives 2002/96/EC and 2003/108/EC on waste electrical and
electronic equipment (WEEE) and its implementation in accordance with national law, electric
tools that have reached the end of their lifecycle must be collected separately and returned to an
environmentally compatible recycling facility.
26
DIFFICULTIES?
CAUSES
-------------------------------------------------
•
No power.
•
Defective power cord, switches or
motor.
-------------------------------------------------
•
Dirty filters.
•
Dust collection bag full or torn.
•
Cartridge filter element saturated
or worn.
-------------------------------------------------
•
Drum is overfull.
•
Dust collection bag full or torn.
•
Cartridge filter element saturated
or worn.
•
Clogged tube or attachments.
-------------------------------------------------
•
Drum is overfull.
•
Dust collection bag full or torn.
•
Cartridge filter element saturated
or worn.
•
Clogged tube or attachments.
-------------------------------------------------
•
The filter on the detergent
solution suction hose is clogged.
•
The spray extraction nozzle is
clogged.
SOLUTIONS
---------------------------------------------------
•
Check that the power supply is on.
•
Contact your technical service
centre (see attached CAT list).
---------------------------------------------------
•
Replace.
•
Replace it.
•
Replace only the filter element.
---------------------------------------------------
•
Check the drum container.
•
Replace it.
•
Replace only the filter element.
•
Check the hose or attachments.
---------------------------------------------------
•
Check the drum container.
•
Replace it.
•
Replace only the filter element.
•
Check the hose or attachments.
---------------------------------------------------
•
Remove the filter from the tube and
rinse it under running water.
•
Disassemble and clean the
nozzle by submerging it in a glass
containing vinegar or limescale
remover (fig. "G1").
Publicité
Table des Matières
