Gisowatt LAVAMATIC TI Instructions D'utilisation Et D'entretien page 22

EN
B - FILTERING SYSTEM
B1 - USE OF THE DUST BAG
(fig. "B1" - "B2" - "B3")
Only use the dust bag with the filter cartridge
inserted (if available).
• Push the filter paper bag into the dust drum contai-
ner (fig."B1").
• Fit the plastic flange (x) into the dust collector air intake (y) making sure not to
damage the bag in the process (fig."B2").
• Ascertain that the bag sticks to the walls of the drum and apply the motor unit.
• The filter paper bag ensures the dust is vacuumed in conditions of hygiene.
Do not use the bag to vacuum sharp or wet materials.
• Replace the bag once two thirds of its vacuum capacity has been reached
(fig."B3").
• The bag must never be reused but should always be replaced.
It is advisable to keep a spare box of dust bags.
B2 - USING THE FILTER
- Model "Lavamatic" ..................: supplied
- Model "Lavamatic TI" ..............: optional
• Place the filter (b) on the motor housing (c)
(fig. "B4").
• Fit the plastic adapter disk (a) onto the filter (b)
(fig. "B5").
• We strongly recommend using the cartridge for
dust and solid debris; it can be used with the dust
collection bag that helps prevent clogging and has
the advantage of making the disposal of vacuu-
med debris quick and sanitary.
Do not use for sharp or damp materials.
B3 - USING THE FOAM FILTER
(fig. "B6")
• To vacuum liquid substances and to extraction cle-
an surfaces, unhook the motor unit and remove
the filter element (if available).
• Fit the foam filter onto the motor support (c) (fig. "B6").
20
(fig. "B4" - "B5")
Cod.: 83 140B0K (*)
(*)
Pack code
(*)
Cod.: 83 201B0G
(*)
Pack code
Cod.: 83 035BHB