Technical Data - Vetus HTP20 Instructions D'installation

Oil Expansion Tank
If an oil expansion tank is fitted, fit filler caps without air holes in all steering pumps.
Connections
A, B Cylinder
connections
C Balance tube
connection

Technical Data

Steering pump
Type
Number of plungers :
Capacity
Operating pressure :
Connections
Filler cap
Weight,
without built-in
non-return valve
with built-in
non-return valve
Maximum wheel
diameter
Pressure relief valve, only by pumps with buit-in non-return valve
Setting
Steering pumps HTP20(R), HTP30(R), HTP42(R)
A
: HTP20(R)
:
5
: 19,7 cm 3 /rev.
(1.2 cu.inch/rev.)
max. 40 bar (570 psi, 3923 kPa), at ø 8 mm tube diameter
max. 56 bar (797 psi, 5492 kPa), at ø 10 mm tube diameter
:
:
: 3.3 kg (7.3 lbs)
: 4.1 kg (9.0 lbs)
: 38 cm (1.5")
: 60 bar (870 psi, 6000 kPa),
at ø 8 mm tube diameter
70 bar (1015 psi, 7000 kPa), at ø 10 mm tube diameter
C
B
C
HTP
HTP30(R)
Axial plunger pump
5
30,0 cm 3 /rev.
(1.8 cu.inch/rev.)
G 1/4 female thread
G 3/8 female thread
3.3 kg (7.3 lbs)
4.1 kg (9.0 lbs)
38 cm (1.5")
ENGLISH
C
A C B
HTPR
HTP42(R)
7
42,0 cm 3 /rev.
(2.6 cu.inch/rev.)
3.3 kg (7.3 lbs)
4.1 kg (9.0 lbs)
53 cm (2")
2.0114
5