Inverkehrbringer; Serviceadresse; Eg-Konformitätserklärung; Technical Data - Crivit 278523 Mode D'emploi D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
kurz beschrieben wird, worin der Mangel besteht
und wann er aufgetreten ist.
Wenn der Defekt von unserer Garantie gedeckt ist,
erhalten Sie das reparierte oder ein neues Produkt
zurück. Mit Reparatur oder Austausch des Produkts
beginnt kein neuer Garantiezeitraum.

Inverkehrbringer:

MONZ Handelsgesellschaft
International mbH & Co. KG
Schöndorfer Str. 60 - 62
54292 Trier / Germany

Serviceadresse:

MONZ SERVICE CENTER
c/o Teknihall Elektronik GmbH
Breitefeld 15, 64839 Münster / Germany
Hotline: 00800 / 68546854 (kostenfrei, Mobil-
funk abweichend)
E-Mail Deutschland: monz-de@teknihall.com
E-Mail Österreich: monz-at@teknihall.com
E-Mail Schweiz: monz-ch@teknihall.com
EG-Konformitätserklärung
Wir, Monz Handelsgesellschaft International mbH
& Co. KG, Schöndorfer Str. 60 - 62, 54292 Trier
/ Germany, erklären in alleiniger Verantwortung,
dass das Produkt allen Anforderungen der Maschi-
nenrichtlinie 2006/42/EC entspricht.
Typ / Gerätebezeichnung
Fahrradaufhängung: 33015
Herstellungsjahr: 2016
Seriennummer: PO30000168
Trier - Germany, den 31.08.2016
Arno Metzer / Geschäftsführer
Stand: 08/2016
10
GB
IE
BICYCLE RACK
Original instructions for use
Introduction ...........................................................11
Drawing in these original instructions for use ....11
Proper intended use .............................................11
Scope of delivery .................................................11
Required assembly tools ......................................11

Technical data .......................................................11

Safety instructions .................................................11
Assembly ...............................................................12
Cleaning and care instructions ............................13
Maintenance .........................................................13
Disposal .................................................................13
Warranty ...............................................................13
Warranty conditions .............................................13
Distributor ..............................................................13
Service address ....................................................13
CE conformity declaration ...................................13
Introduction:
Congratulations!
You have chosen to purchase a high-quality product.
Please familiarize yourself with the product prior to in-
itial commissioning. To this end, please carefully read
the following instructions for use. Use the product only
as described and for the specified areas of use. Keep
these instructions for use safe. Also provide all docu-
ments when passing the product on to a third party.
Symbols in these original instructions
for use
! This symbol warns you of a risk of injury.
!
Supplemental information is marked like this.
!
Proper intended use:
This bicycle rack is for hanging up all conventional
bicycles on the ceiling. Maximum 1 bicycle may
be hung on the bicycle rack. This bicycle rack is
not suitable for tricycles or bicycles with training
wheels. The product may also be used for bicycles
with an auxiliary drive. Other uses of or modifica-
tions to the product are not proper intended use
and can result in risks such as injuries and damage.
The distributor does not assume any liability for
damage resulting from improper use.
!
This bicycle rack may not be used
for maintenance work on the bicycle. It is
solely for storage.
!
Warning notice!
To reduce the risk of injury, please read these orig-
inal instructions for use.
Scope of delivery:
(A1)
(a) 1x ceiling mount
(b) 1x ceiling mount with brake and screw (1)
(c) 2x hooks
(d) 1x nylon rope
(e) 1x mounting hook
(f) 1x handle
(g) 1x safety hook
(h) 6x Phillips head screw approx. Ø 4.5 x 38 mm
(h) 6x dowels approx. Ø 7.5 x 38 mm
(j) 1x original instructions for use
Make sure all of the parts are included and undam-
aged; otherwise, please contact your retailer.
Required assembly tools:
(A2)
(not included in the delivery)
- Phillips head screwdriver (PH2)
- drill
- stone drill bit (Ø 8 mm)
- measuring tape
- pencil
Technical data:
Type: Bicycle rack
Article no.: 33015/IAN 278523
Batch number: PO30000168
Production date: 2016
Ceiling height: max. 4 m
Weight: ca. 1900 g
Suitable for bicycles: 26"- 28" (66 - 71cm)
Max. load: 30 kg (per hook 15 kg)
Warranty: 3 years
!
Safety instructions!
The product is not intended for commercial use.
Please note that the bicycle rack may only be
mounted on ceilings with sufficient load-bearing
capacity. The included dowels are suitable for:
concrete, brick, sand-lime brick.
No liability is assumed for third-party accessories.
11

Publicité

Table des Matières
loading

Table des Matières