Description; Theory Of Operation; Technical Data; Installation - Metcal BVX-200 Guide De L'utilisateur

Description

2.
Operating Elements and Construction
2.1.

Theory of Operation

2.2.
The efficient removal of hazardous fumes at your workplace is a two-step process: fume capture
and filtration. The filter unit is supplied with a set of filters already installed.
To capture the fumes, Metcal recommends use of optional exhaust arms and accessories
(purchased separately). The exhaust arms need to be set up properly (instruction supplied with
exhaust arm) and the nozzle positioned in a way to optimize the fume capture.
Air extracted from your work area will be purified when passing through the filters inside the unit
and then is returned into your work area.
Contact your local Metcal representative if there are any questions regarding the proper
selection of filters for your application.
When the filters are blocked, an alarm will start to sound. See section 5.4 for filter replacement
procedures.

Technical Data

3.
Max. airflow, free blowing
Flow rate
Static pressure
Noise level (approx.)
Voltage
Frequency
Power
Safety compliance
Dimensions W/D/Hmm
Dimensions W/D/H in
Weight (approx.)

Installation

4.
Remove the Fume Extraction System from packing materials and place on the floor under workbench
or near your work area where fume extraction is required. Make sure you have access to the unit for
filter maintenance.
250m3/h (150cfm)
2 x 75 m3/h (45cfm)
850 Pa (3.5"WC)
< 55dBA
100 – 240 VAC, 1 phase
50-60 Hz
85 Watts
UL, CSA, CE
508 x 254 x 388
20" x 10" x 15.3"
20 lbs. / 9 kg